The pothole fractured a bolt on the axle.
Using pliers or a pipe wrench to tighten a bolt or nut. This may scar the bolt head or nut creating a sharp edge.
Remove the upper suspension arm nut and bolt at the axle bracket.
He'd pulled into the first shop off I-84 and was told that a loose head bolt was to blame.
At seven we were awakened, and rushed forth to squabble over the water in the bathroom, and bolt our ration of bread and tea.
Owing to the high levels of radioactivity, it had been impossible to bolt or weld the Object Shelter together, so within a decade it was on the verge of collapse.
The lightning bolt is a zigzag.
He slammed the door and drove the bolt home
A jagged bolt protrudes from the concrete walls of the tunnel.
He crawls over to the toilet and finds an Allen bolt. He inserts the wrench and begins to turn it.
Remove the nut and bolt attaching the track bar to the track bar mount on the body of the vehiclRemove the track bar from the track bar mount.
A white marble cross that marked their graves had been broken off at the base, perhaps by vandals or a lightning bolt, and had fallen on the ground at the head of the tomb.
He locked the door and pressed the bolt home.
Using bolt cutters, they quickly pluck a Rembrandt from the wall and stuff it into a bag.
Friction coefficient depends on utilization of bolt strength, torque control technology investment and assembly quality, so it has an important pact in fastener assembly.
Install the seat/shoulder belt anchor bolt.
Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.
This machine USES high quality steel and connect with bolt rather than welding so as to avoid disfigure of the framework.
We need an eye bolt to fit this valve.
At this stage, there is no lightning-bolt solution, but two things would prevent matters from getting worse.
And had there been lightning and no drought, the bolt that struck Honey Prairie, deep inside the Okefenokee National Wildlife Refuge, might have just knocked down a tree or two.
Instead of heating and forming the vinyl like you would a rivet, you want to remove the vinyl over the bolt.
I push off against his face, crawl across the yard, get inside, bolt the door.
The plumber take out a wrench and tighten the bolt.
Thus was hatched Plan b: engrave something simpler and then bolt it to the SSD.
The detective on the phone explained how someone had sprayed a canister of Freon into the dead-bolt lock and then tapped the lock with a cold chisel to shatter the cylinder.
I'm wondering if my rear shock is adjusted optimally. As it is, I can see the number "1", surrounded by yellow, just to the right of the bolt on the shock.
